Using Ncp To Connect - Ricoh Aficio MP W3600 General Settings Manual

Registering Addresses and Users for Scanner Functions

Using NCP to Connect

This section describes the procedure for registering, changing, and deleting NCP
folders.
Note
❒ To register a shared folder configured in Windows, see "Using SMB to Connect"
❒ To register a folder in an FTP server, see "Using FTP to Connect"
Reference
p.138 "Using SMB to Connect"
p.145 "Using FTP to Connect"
Registering a NCP Folder
This section describes how to register an NCP folder.
A
Press [System Settings].
6
B
Press [Administrator Tools].
C
Press [Address Book Management].
D
Check that [Program / Change] is selected.
E
Press the name you want to register or enter the registered number using
the number keys.
If you press [Search], you can search by the registered name, user code, folder
name, or e-mail address.
F
Press [Auth. Info], and then press [TNext].
G
Press [Specify Other Auth. Info] on the right side of Folder Authentication.
When [Do not Specify] is selected, the NCP User Name and NCP Password that
you have specified in Default User Name / Password (Send) of File Transfer
settings applies. For details, see "File Transfer".
H
Press [Change] under "Login User Name".
150