Ricoh Aficio MP W3600 General Settings Manual page 151

Changing the registered SMB folder
This section describes how to change the registered SMB folder.
A
Press [Change] under "Path".
B
Enter the New path where the folder is located, and then press [OK].
You can also use Browse Network to specify a new folder. For details, see "Lo-
cating the SMB folder using Browse Network".
Reference
p.141 "Locating the SMB folder using Browse Network"
To change the protocol
This section describes how to change the protocol.
A
Press [FTP] or [NCP].
B
A confirmation message appears. Press [Yes].
Changing the protocol will clear all settings made under the previous protocol.
C
Enter each item again.
Reference
p.145 "Registering a FTP Folder"
Registering Folders
143
6