Ricoh Aficio MP W3600 General Settings Manual page 95

❖ Stamp Format
Specify how each of stamp is printed.
• Stamp Position
Specify where to print the stamp.
The default setting is Top Right.
• Stamp Position
You can adjust the position of the stamp within the available ranges shown
below.
Metric version:
"Top Left"...T/B: 4-407mm, L/R: 4-407mm
"Top Center"...T/B: 4-407mm, L/R: 203-203mm
"Top Right"...T/B: 4-407mm, L/R: 4-407mm
"Center Left"...T/B: 203-203mm, L/R: 4-407mm
"Center"...T/B: 203-203mm, L/R: 203-203mm
"Center Right"...T/B: 203-203mm, L/R: 4-407mm
"Bottom Left"...T/B: 4-407mm, L/R: 4-407mm
"Bottom Center"...T/B: 4-407mm, L/R: 203-203mm
"Bottom Right"...T/B: 4-407mm, L/R: 4-407mm
Inch version:
"Top Left"...T/B: 0.1"-16.0", L/R: 0.1"-16.0"
"Top Center"...T/B: 0.1"-16.0", L/R: 8.0"-8.0"
"Top Right"...T/B: 0.1"-16.0", L/R: 0.1"-16.0"
"Center Left"...T/B: 8.0"-8.0", L/R: 0.1"-16.0"
"Center"...T/B: 8.0"-8.0", L/R: 8.0"-8.0"
"Center Right"...T/B: 8.0"-8.0", L/R: 0.1"-16.0"
"Bottom Left"...T/B: 0.1"-16.0", L/R: 0.1"-16.0"
"Bottom Center"...T/B: 0.1"-16.0", L/R: 8.0"-8.0"
"Bottom Right"...T/B: 0.1"-16.0", L/R: 0.1"-16.0"
• Size
You can set the size of the stamp.
The default setting is 1X.
• Density
You can set the pattern used to print the stamp.
Normal:
The stamp is printed on the image. You cannot check which parts will overlap.
Lighter:
The image can be seen through the stamp.
Lightest:
The image appears even clearer than in the Lighter setting.
The default setting is Normal.
• Page to Stamp
You can have the stamp printed on the first page or all pages.
The default setting is All Pages.
Reference
"Preset Stamp", Copy/ Document Server Reference
Stamp
3
87