Page Numbering - Ricoh Aficio MP W3600 General Settings Manual

Copier / Document Server Features

Page Numbering

This section describes the user tools in the Page Numbering menu under Stamp.
❖ Stamp Format
You can select the page number format given priority when [Page Numbering]
is pressed.
The default setting is P1,P2....
❖ Font
You can select the page number printed in Page Numbering mode.
3
The default setting is Font 1.
❖ Size
You can set the size of the stamp printed in Page Numbering mode.
The default setting is Auto.
❖ Page Numbering in Combine
You can set page numbering when using the Combine function and the Page
Numbering function together.
The default setting is Per Original.
❖ Stamp Position
Specify how each of stamp is printed.
• Stamp Position
Specify where to print the stamp.
• Stamp Position
You can adjust the position of the stamp within the available ranges shown
below.
Metric version:
"Top Left"...T/B: 4-407mm, L/R: 4-407mm
"Top Center"...T/B: 4-407mm, L/R: 203-203mm
"Top Right"...T/B: 4-407mm, L/R: 4-407mm
"Bottom Left"...T/B: 4-407mm, L/R: 4-407mm
"Bottom Center"...T/B: 4-407mm, L/R: 203-203mm
"Bottom Right"...T/B: 4-407mm, L/R: 4-407mm
Inch version:
"Top Left"...T/B: 0.1"-16.0", L/R: 0.1"-16.0"
"Top Center"...T/B: 0.1"-16.0", L/R: 8.0"-8.0"
"Top Right"...T/B: 0.1"-16.0", L/R: 0.1"-16.0"
"Bottom Left"...T/B: 0.1"-16.0", L/R: 0.1"-16.0"
"Bottom Center"...T/B: 0.1"-16.0", L/R: 8.0"-8.0"
"Bottom Right"...T/B: 0.1"-16.0", L/R: 0.1"-16.0"
90