Date Stamp - Ricoh Aficio MP W3600 General Settings Manual

Date Stamp

This section describes the user tools in the Date Stamp menu under Stamp.
❖ Format
You can select the date format for Date Stamp mode.
The default setting is DD / MM / YYYY (Metric version) / MM / DD / YYYY
(Inch version).
❖ Font
You can select the Date Stamp font.
The default setting is Font 1.
❖ Size
You can set the Date Stamp size.
The default setting is Auto.
❖ Superimpose
You can have the Date Stamp printed in white when it overlaps black parts of the image.
The default setting is Off.
❖ Stamp Setting
Specify how Date Stamp is printed.
• Stamp Position
Specify where to print the Date Stamp.
The default setting is Top Left.
• Stamp Position
You can adjust the position of the Date Stamp within the available ranges
shown below.
Metric version:
"Top Left"...T/B: 4-407mm, L/R: 4-407mm
"Top Center"...T/B: 4-407mm, L/R: 203-203mm
"Top Right"...T/B: 4-407mm, L/R: 4-407mm
"Bottom Left"...T/B: 4-407mm, L/R: 4-407mm
"Bottom Center"...T/B: 4-407mm, L/R: 203-203mm
"Bottom Right"...T/B: 4-407mm, L/R: 4-407mm
Inch version:
"Top Left"...T/B: 0.1"-16.0", L/R: 0.1"-16.0"
"Top Center"...T/B: 0.1"-16.0", L/R: 8.0"-8.0"
"Top Right"...T/B: 0.1"-16.0", L/R: 0.1"-16.0"
"Bottom Left"...T/B: 0.1"-16.0", L/R: 0.1"-16.0"
"Bottom Center"...T/B: 0.1"-16.0", L/R: 8.0"-8.0"
"Bottom Right"...T/B: 0.1"-16.0", L/R: 0.1"-16.0"
• Page to Stamp
Sets whether to print the stamp on all pages or only the first page.
The default setting is All Pages.
Stamp
3
89