Table of Contents
Advertisement
Lexicon
MC-12 Serial Communications Protocol
dd- is the day
(sp) - is an ASCII space character (0x20)
hh - is the hour
mm - is the minute
7.3.5 Get System Status (MC-12, MC-1)
Request to MC-12 for its current system status. MC-12 will respond with "System Status Packet".
This command has been maintained for backward compatibility with MC-1. In order to maintain backward
compatibility, the MC-12 Parameters have been mapped to the MC-1 parameters as described in each Data
Description. MC-12 users should be using the command described in
7.3.5.1 Command Packet Description
Application Header:
Command DC_CMD_GET_SYS_STATUS
Data Count 0
Application Data:
7.3.5.2 System Status Response Packet
Application Header:
Command DC_RESP_SYS_STATUS
Data Count 10
Application Data:
Data[0]
Data[1]
Data[2]
Data[3]
Data[4]
Data[5]
Data[6]
Data[7]
Data[8]
Data[9]
7.3.5.3 Data Description
System Volume:
Data Type:
Maximum Value: 92
Conversion:
Current Input:
Data Type:
Definition/Conversion:
Current Effect Id:
Data Type:
© 2004 Harman Specialty Group All rights reserved.
N/A
System Volume
Current Input
Current Effect Id
Current Input Sample Rate nn
Current Input Format
Mute Active
Effect Bypass
Left/Right Balance
Front/Back Balance
Video Synch
Unsigned 8 bit integer.
0 = -80 dB
92 = +12 dB
Unsigned 8 bit integer
Appendix F MC-12 Input Ids
Unsigned 8 bit integer
Printed on: 07/19/04
7.3.45
(MC-12_Get_System_Status).
0x16
0x00
0x81
0x0A
nn
nn
nn
nn
nn
nn
nn
nn
nn
20 of 102
Advertisement
Table of Contents
