Table of Contents
Advertisement
Lexicon
MC-12 Serial Communications Protocol
7.3.55 MC-12 Set Input Name by Id (MC-12)
Sets an Input Name to the transmitted value for a given input.
7.3.55.1 Command Packet Description
Application Header:
Command
Data Count
Application Data:
Data[0]
Data[1]-Data[DataCount-1]
7.3.55.2 Data Description
InputId:
Data Type:
Description/Conversion:
InputName:
Data Type:
Null (0x00) terminated ASCII character string.
Max Length:
INPUT_NAME_LENGTH defined in
7.3.55.3 MC-12 Response
MC-12 will copy the InputName to the given input.
7.3.55.4 Data Validation:
The InputId must be a valid Input Id. If it is not the MC-12 will respond with a NAK packet and error code
DC_INVALID_INPUT. If the InputName string exceeds the INPUT_NAME_LENGTH, the MC-12 will
truncate the string to the INPUT_NAME_LENGTH.
© 2004 Harman Specialty Group All rights reserved.
MC_CMD_SET_INPUT_NAME 0x48
Number of characters in
InputName + 2
InputId
InputName
Unsigned 8 bit Integer
Appendix F MC-12 Input Ids
Printed on: 07/19/04
nn
0 to 7
ch ch ch ... 0x00
Appendix G Protocol
Constants.
53 of 102
Advertisement
Table of Contents
