Table of Contents
Advertisement
Lexicon
MC-12 Serial Communications Protocol
7.3.24.1 Command Packet Description
Application Header:
Command
Data Count 1
Application Data:
Data[0]
7.3.24.2 Data Description
Value:
Data Type:
Max:
Conversion:
7.3.24.3 MC-12 Response
The MC-12 will assign the value from the packet to the Zone 2 volume.
7.3.24.4 Data Validation
If a value is passed that exceeds the maximum value of that parameter the MC-12 will ignore the command
and transmit a NAK command with an error code DC_INVALID_DATA.
7.3.25 Set Zone2 Left/Right Balance (MC-12, MC-1)
Commands MC-12 to set the Zone 2 balance to the value in this packet.
This command has been maintained for backward compatibility with MC-1. In order to maintain backward
compatibility, the MC-12 Parameters have been mapped to the MC-1 parameters as described in each Data
Description. MC-12 users should be using the command described in
(MC12_Set_Zone2_Left_Right_Balance).
7.3.25.1 Packet Description
Application Header:
Command
Data Count 1
Application Data:
Data[0]
7.3.25.2 Data Description
Value:
Data Type:
Max:
Conversion:
7.3.25.3 MC-12 Response
The MC-12 will assign the value from the packet to the Zone 2 balance.
© 2004 Harman Specialty Group All rights reserved.
DC_CMD_SET_ZONE2_VOLUME
Value
Unsigned 8 bit integer.
92
0 = -80 dB
92 = +12 dB
DC_CMD_SET_ZONE2_BALANCE
Value
Unsigned 8 bit integer
32
0 = Left
32 = Right
Printed on: 07/19/04
0x27
0x01
nn
7.3.53
0x28
0x01
nn
29 of 102
Advertisement
Table of Contents
