Table of Contents
Advertisement
Lexicon
MC-12 Serial Communications Protocol
Max Length:
40 Characters.
7.3.35.3 MC-12 Response
The display string is sent to the OSD and Front Panel Display. The MC-12 will ACK when completed with
this command.
7.3.35.4 Data Validation:
If a string length exceeds the 40 character maximum the string will be truncated before displaying and the
MC-12 transmit a DC_NAK command with an error code DC_INVALID_DATA.
7.3.36 MC-12 Get Parameter Definition by Id (MC-12)
Request to MC-12 for a Parameter Definition by Parameter Id. MC-12 will respond with "MC-12 Parameter
Definition Packet".
7.3.36.1 Command Packet Description
Application Header:
Command MC_GET_PARAM_BY_ID
Data Count 2
Application Data:
Data[0]
Data[1]
7.3.36.2 Data Description
ParamId:
Data Type:
Unsigned 16 bit Integer
Max Value:
Max Parameter Count as reported by the MC-12 Unit Configuration Response
Packet in 7.3.39.2
7.3.36.3 Data Validation:
If the ParamId is not a valid Id the MC-12 will respond with a NAK packet and error code DC_
INVALID_PARAM_ID.
© 2004 Harman Specialty Group All rights reserved.
ParamId(LSB)
ParamId(MSB)
Printed on: 07/19/04
0x35
0x02
nn
nn
35 of 102
Advertisement
Table of Contents
