Mc-12 Get Input Name By Id (Mc-12) - Lexicon MC-12 V4.0 - SERIAL COMMUNICATIONS PROTOCOL DEFINITION REV 1-6 Manual

Lexicon
MC-12 Serial Communications Protocol
If a value is passed that exceeds the maximum value of that parameter the MC-12 will ignore the command
and transmit a NAK command with an error code DC_INVALID_DATA.

7.3.54 MC-12 Get Input Name by Id (MC-12)

This command is a request to MC-12 for the custom input name. MC-12 will respond with "Input Name
Packet".
7.3.54.1 Command Packet Description
Application Header:
Command MC_CMD_GET_INPUT_NAME
Data Count 1
Application Data:
Data[0]
7.3.54.2 Data Description
InputId:
Data Type:
Definition/Conversion:
7.3.54.3 Data Validation:
The InputId must be a valid Input number. If it is not the MC-12 will respond with a NAK packet and error
code DC_INVALID_INPUT.
7.3.54.4 Input Name Response Packet
Application Header:
Command
Data Count
Application Data:
Data[0]
Data[1]- Data[DataCount-1] InputName
7.3.54.5 Data Description
InputId:
Data Type:
Definition/Conversion:
InputName:
Data Type: Null (0x00) terminated ASCII character string.
Max Length: INPUT_NAME_LENGTH defined in
© 2004 Harman Specialty Group All rights reserved.
InputId
Unsigned 8 bit Integer
Appendix F MC-12 Input Ids
MC_RESP_INPUT_NAME
Number of Characters in
InputName + 2
InputId
Unsigned 8 bit Integer
Appendix F MC-12 Input Ids
Printed on: 07/19/04
0x47
0x01
nn
0x96
nn
nn
ch ch ch ... 0x00
Appendix G Protocol Constants.
52 of 102