System Mode Parameters - Lexicon MPX 200 - REV 2 Manual

MPX 200
5. EDIT Display
Indicates which parameter is selected for editing.
6. Load Button
Loads the cued program. Lights to indicate that the
cued program is different from the current program.
7. Edit Button/MIDI LED
Lights to indicate that the current program has been
altered from its original version. Blinks to indicate
MIDI activity. Press the Load button to return to
cueing new programs.
8. Adjust Knob
Performs multiple functions: selects effects and
routing, controls edit functions, and changes
parameter settings. Functions are assignable by
pressing Load, Edit, etc.
9. Compressor Button
When on, the red LED lights and the four
COMPRESSOR LEDs show the amount of gain
reduction being obtained.
10. Store Button
Activates store functions. When pressed with Tap,
enters MIDI Learn Mode.
11. Bypass Button
Mutes or bypasses the incoming signal, depending
on the setting of the System Mode parameter
Bypass. When pressed for 2 seconds, accesses

System Mode parameters.

12. Tap/Cancel Button
Flashes to indicate tempo-based programs. When
pressed twice, sets tempo. When held, uses input
level or dialed-in value to determine tempo. When
pressed with Store, enters MIDI Learn Mode.
13. Power Switch
Powers the unit on and off.
Getting Started
1-5