Set Communication Configuration (Mc-12, Mc-1); Set Mute (Mc-12, Mc-1) - Lexicon MC-12 V4.0 - SERIAL COMMUNICATIONS PROTOCOL DEFINITION REV 1-6 Manual

Lexicon
MC-12 Serial Communications Protocol
FALSE Indicates the MC-12 will not transmit parameter change Notifications.

7.3.32 Set Communication Configuration (MC-12, MC-1)

The Set Communication Configuration Command allows the serial port user to set up the various serial
port/ protocol configuration parameters.
7.3.32.1 Command Packet Description
Application Header:
Command
Data Count
Application Data:
Data[0]
7.3.32.2 Data Description
Data Word Bit Definition
0 0 Acknowledge Enable
0 1 Parameter Change Enable
Acknowledge Enable:
TRUE Indicates the MC-12 will transmit Acknowledge Notification's to the Host.
FALSE Indicates the MC-12 will not transmit any positive Acknowledge Notification
messages. The MC-12 will always transmit NAK error notification messages.
Parameter Change Enable:
TRUE Indicates the MC-12 will transmit any parameter change Notification as
specified in the Parameter Change Notification Message.
FALSE Indicates the MC-12 will not transmit parameter change Notifications.
7.3.32.3 MC-12 Response
The data values transmitted will be copied over to the registers stored in nonvolatile RAM. The MC-12
will respond with an ACK Packet.

7.3.33 Set Mute (MC-12, MC-1)

The Set Mute Command message allows the RS232 users to set/clear the MC-12 mute state directly.
7.3.33.1 Command Packet Description
Application Header:
Command
Data Count
Application Data:
Data[0]
7.3.33.2 Data Description
© 2004 Harman Specialty Group All rights reserved.
DC_CMD_SET_COM_CONFIG
1
Configuration Register 0
DC_CMD_SET_MUTE
1
Mute State
Printed on: 07/19/04
0x30
0x01
nn
0x31
0x01
nn
33 of 102