Mc-12 Set Front/Back Balance (Mc-12); Mc-12 Set Active Effect By Id (Mc-12) - Lexicon MC-12 V4.0 - SERIAL COMMUNICATIONS PROTOCOL DEFINITION REV 1-6 Manual

Lexicon
MC-12 Serial Communications Protocol
7.3.48.2 Data Description
Value:
Data Type:
Max:
Min:
7.3.48.3 MC-12 Response
The MC-12 will assign the value from the packet to the system balance.
7.3.48.4 Data Validation
If a value is passed that exceeds the maximum value of that parameter the MC-12 will ignore the command
and transmit a DC_NAK command with an error code DC_INVALID_DATA.

7.3.49 MC-12 Set Front/Back Balance (MC-12)

Commands MC-12 to set the front/back balance to the value in this packet.
7.3.49.1 Packet Description
Application Header:
Command MC_CMD_SET_FRONT_BACK_BALANCE
Data Count 1
Application Data:
Data[0]
7.3.49.2 Data Description
Value:
Data Type:
Max:
Min:
7.3.49.3 MC-12 Response
The MC-12 will assign the value from the packet to the front/back balance.
7.3.49.4 Data Validation
If a value is passed that exceeds the maximum value of that parameter the MC-12 will ignore the command
and transmit a NAK command with an error code DC_INVALID_DATA.

7.3.50 MC-12 Set Active Effect by Id (MC-12)

This command requests the MC-12 to set the active effect to the value in this packet.
© 2004 Harman Specialty Group All rights reserved.
Signed 8 bit integer (2's compliment)
+16 (0x10) (Full Right)
-16 (0xF0) (Full Left)
Value
Signed 8 bit integer (2's compliment)
+16 (0x10) (Full Front)
-16 (0xF0) (Full Back)
Printed on: 07/19/04
0x42
0x01
nn
49 of 102