To Add New Receiver - Ricoh Aficio MP 2500SPF Facsimile Reference Manual

Fax via Computer
F
Set the properties for Internet Fax data format other than the mode selection.
If you change the mode to "Simple Mode", you cannot set machine properties.
G
Click [OK] at the upper or lower left of the screen.
To cancel the setting, click [Cancel] at the upper or lower left of the screen.
The Address Book is displayed.
H
Close the Web browser.

To Add New Receiver

Follow these steps to use Web Image Monitor to add a new destination to the
Address Book.
A
Start the Web browser.
B
Enter the IPv4 address of the machine you want to monitor after "http://" in
5
the address field.
The top screen is displayed.
C
Click [Login], and then enter the Administrator's name and password.
D
Click [Address Book] in the left pane.
The Address Book is displayed.
E
Click [Add User].
The [Add User] page appears.
F
Enter the registration number, name, and e-mail address, then set the nec-
essary properties.
You can set the Internet Fax data format after entering the e-mail address.
G
Click [Full Mode] under [Internet Fax Data Format], and set the properties ac-
cording to the receiver's properties.
If you change the mode to "Simple Mode", you cannot set machine properties.
H
Click [OK] at the upper or lower left of the screen.
To cancel the setting, click [Cancel] at the upper or lower left of the screen.
The Address Book is displayed.
I
Close the Web browser.
180