Using The Original Glass; How To Use The Original Glass - Konica Minolta bizhub 160 User Manual

Using scan to server (FTP) operations
5.1.2

Using the original glass

How to use the original glass

1
Press the [Scan] key.
The machine switches to scan mode,
and the scan screen appears.
2
Open the original cover and place the
document on the original glass.
– Load the document with the sur-
face to be scanned face down.
– Align the document with the
scale marks at the top and left
side of the original glass.
3
Press the [Speed Dial] key, and then
use the 10-key pad to enter the 3-
digit speed dial number programmed
with the FTP server address to which
you want to upload the scan data.
– Specify a speed dial number be-
tween "201" and "210".
– An FTP server address can only
be specified with a speed dial
number. In addition, the FTP
server addresses are registered
for a speed dial number using PageScope Web Connection. For
details, refer to "Specifying the setting for speed dialing (FTP serv-
er)" on page 3-51.
– If you make a mistake, press the [No/C] key, and then enter the cor-
rect number.
– If there is no address registered for the specified speed dial
number, an error message appears. Enter a correct speed dial
number.
SU-502
5
5-5