Common Messages And Their Remedies - Konica Minolta bizhub 160 User Manual

9
9 Operation error messages
9.1

Common messages and their remedies

Message
*COMM.ERROR*
XXXX Server
*CANNOT CONNECT*
XXXX Server
*CANNOT GET IP*
XXXX Server
*DISCONNECT*
XXXX Server
*WRONG PASSWORD*
XXXX Server
*RECEIVE WRONG DATA*
XXXX Server
*MEM.FULL/TX CANCEL*
*MEM.FULL/RX CANCEL*
XXXX Server
*FILE FULL/TX CANCEL*
9-2
Cause
Communication is not possi-
ble because of some problem
in the machine or due to the
condition of the network or
server.
A connection to the server
cannot be established.
The IP address could not be
assigned by the DNS or DHCP
server.
The connection to the server
was cut.
The password is incorrect, so
the machine could not log
onto the server.
An e-mail message that can-
not be printed by this machine
was received. (For a file at-
tachment in a format other
than TIFF-F)
While sending an e-mail mes-
sage, the size of the data for
the scanned image has ex-
ceeded the capacity of the
memory.
While receiving an e-mail
message, the size of the data
for the scanned image has ex-
ceeded the capacity of the
memory.
While sending an e-mail mes-
sage, the maximum number of
managed memory files is
used.
Operation error messages
Remedy
Check the transmission re-
sults.
Consult with the network ad-
ministrator.
Check that the ethernet cable
is correctly connected.
(p. 3-2)
Check the settings for the
functions on the "E-MAIL
SETTING 1", "E-MAIL SET-
TING 2" and "NETWORK
SETTING" menus. (p. 3-4)
Consult with the network ad-
ministrator.
Consult with the network ad-
ministrator.
Consult with the network ad-
ministrator.
For a POP3 server, check the
setting for the functions on the
"E-MAIL SETTING 2" menu.
(p. 3-21)
Consult with the network ad-
ministrator.
Ask the sender to send a TIFF-
F file or text in the correct for-
mat.
Retrieve all received e-mail
messages stored in the mem-
ory.
Retrieve all received e-mail
messages stored in the mem-
ory.
Retrieve all received e-mail
messages stored in the mem-
ory.
SU-502