Konica Minolta bizhub 160 User Manual page 68

Getting ready
4
Press the one-touch dial key where
you wish to add an address.
5
Enter the recipient name.
– For information on entering text,
refer to "Entering text characters"
on page 2-11.
– Up to 20 characters can be entered for the recipient name.
6
Press the [Yes] key.
7
Enter the e-mail address of the recip-
ient.
– For information on entering text,
refer to "Entering text characters"
on page 2-11.
– Up to 64 characters can be entered for the e-mail address.
– If only numbers are entered for the address, it will be regarded as a
fax number.
8
Press the [Yes] key.
– The [Yes] key cannot be pressed if the e-mail address does not
contain "@".
– The settings are registered. To add information for other one-touch
dial keys, repeat steps 4 through 8.
9
Press the [No/C] key when you have
finished adding addresses.
The fax registration screen appears
again.
SU-502
3
3-37