Konica Minolta bizhub 160 User Manual page 121

6
5
Using the 10-key pad, enter the e-
mail address of the recipient, and
then press the ) key.
– "Specifying the destination using
one-touch dial keys" on page 4-15.
– "Specifying the destination using speed dial numbers" on
page 4-16.
– "Specifying the destination using the phone book" on page 4-18.
– For information on entering text, refer to "Entering text characters"
on page 2-11.
E-mail addresses specified after the [Fax] key is pressed are set as In-
ternet faxing recipients.
6
Press the [Start] key.
7
Check that the correct document
size appears on the screen.
– To change the document size,
press the , key, and then use the
* and ) keys to select the desired document size on the screen.
8
Press the [Yes] key. Scanning starts.
9
When scanning a document contain-
ing several pages, place the next
page on the original glass when the
screen shown at the right appears,
and then press the [Yes] key.
– Repeat step 9 until all of the pages in the document have been
scanned.
10
Press the [Start] key. The scan data is sent to the recipient.
– A beep sounds to indicate that the transmission has been complet-
ed.
6-6
Using internet faxing operations
SU-502