Konica Minolta bizhub 160 User Manual page 91

4
4
Press the keys on the 10-key pad to
enter the e-mail address, then press
the ) key, and then press the [Yes]
key. The e-mail address can also be
specified using one of the following
methods.
– "Specifying the destination using one-touch dial keys" on
page 4-15.
– "Specifying the destination using speed dial numbers" on
page 4-16.
– "Specifying the destination using the phone book" on page 4-18.
– To skip specifying the subject line, resolution, etc., press the [Start]
key, instead of the [Yes] key.
E-mail addresses specified after the [Scan] key is pressed are set as
Scan to E-mail recipients.
5
Enter a title (subject), and then press
the [Yes] key.
6
Enter the e-mail address for any ad-
ditional recipient, and then press the
[Yes] key.
– To specify more then one CC ad-
dress, press the [Yes] key to enter the additional addresses. Repeat
step 6 until all of the recipients have been specified.
7
After you have finished specifying the
addresses for additional recipients,
press the [Yes] key.
8
Press the * and ) keys to select the
color mode
press the [Yes] key.
– COLOR
the scan mode when the automatic document feeder is used. In
that case, select
4-4
(GRAY or B/W), and then
cannot be selected for
or
GRAY B/W
Using scan to e-mail operations
(black and white).
SU-502