Specifying The Destination Using Group Dial Keys; How To Use Group Dial Keys - Konica Minolta bizhub 160 User Manual

Using scan to e-mail operations
4.4

Specifying the destination using group dial keys

Note
The group dial setting must have already been specified.
For information on setting up group dial keys, refer to "Adding destina-
tions" on page 3-36.
If at least one fax number is registered as a recipient with a group dial key,
that group dial key cannot be used with the Scan to E-mail transmission.
In this case, the message
play.

How to use group dial keys

1
Press the [Scan] key.
The machine enters Scan mode, and the scan screen appears.
2
Press the one-touch dial key ([01] to
[15]) programmed with the group
where you want to send the scan da-
ta.
SU-502
NOT E-MAIL ADDRESS
4
appears in the dis-
4-17