Konica Minolta bizhub 160 User Manual page 61

3
POP3 configuration
Function
POP3 server address
Account name
Password
Auto reception
Interval
Reply address
Port number
POP3 server timeout
3-30
Description
This function is used to specify the IP address or host name of the
POP3 server. (Up to 64 characters)
This function is used to specify the account name used to log in
to the POP3 server. (Up to 64 characters)
This function is used to specify the password associated with the
account name used to log in to the POP3 server. (Up to 32 char-
acters)
Select whether or not the Auto Reception function is used.
This function is used to specify the time interval (between 1 and
60 minutes) for checking e-mail when the auto reception function
is enabled.
This function is used to specify the return e-mail address for error
messages. If an error occurs, an error message will be sent to the
e-mail address specified here. Normally, the reply address is set
to the e-mail address of the administrator. (Up to 64 characters)
This function is used to specify the port number for the POP3
server. Normally, port number 110 is used. (1 to 65535)
This function is used to specify the length of time (30 to 300 sec-
onds) until the connection to the POP3 server times out.
Getting ready
SU-502