Konica Minolta bizhub 160 User Manual page 113

5
4
Press the [Yes] key.
– To skip specifying the image res-
olution, press the [Start] key, in-
stead of the [Yes] key.
5
Press the * and ) keys to select the
scan mode, and then press the [Yes]
key.
6
Press the * and ) keys to select the
resolution (150 × 150 dpi, 300 × 300
dpi, or 600 × 600 dpi), and then press
the [Yes] key.
– The 600 × 600 dpi resolution cannot be selected if
GRAY
– To specify detailed settings for the scan mode, press the , key.
– For information on specifying detailed settings, refer to "Changing
the scan mode settings" on page 4-9.
7
Press the * and ) keys to select
BOOK.
– To change the size of the
scanned image, press the , key.
– For information on changing the size, refer to "Changing the
scanned image size" on page 4-11.
8
Press the [Yes] key.
Scanning starts.
9
When scanning a document contain-
ing several pages, place the next
page on the original glass when the
screen shown at the right appears,
and then press the [Yes] key.
– Repeat step 9 until all of the pages in the document have been
scanned.
10
Press the [Start] key.
The machine connects to the FTP server and uploads the scan data.
5-6
was selected as the scan mode in step 5.
Using scan to server (FTP) operations
COLOR or
SU-502