System Requirements; Accessing Pagescope Web Connection; How To Access Pagescope Web Connection; Using Pagescope Web Connection - Konica Minolta bizhub 160 User Manual

Overview
2.7.3

System requirements

PageScope Web Connection can be used in the following system environ-
ments.
System requirements
Operating system
Browser
2.7.4

Accessing PageScope Web Connection

Note
In order to use PageScope Web Connection, an IP address, subnet
mask, and gateway setting must already be specified from the control
panel of the machine. For information on specifying these settings, refer
to "Specifying network settings ("NETWORK SETTING" menu)" on
page 3-9.

How to access PageScope Web Connection

PageScope Web Connection is accessed directly using a web browser.
1
Start up your web browser.
2
Enter the IP address of the machine into the "Address" box, and then
press the [Enter] key.
http://<machine_IP_address>/
– (Example) If the machine IP address is 192.168.0.100, enter:
http://192.168.0.100/
3
The PageScope Web Connection screen appears.
2.7.5

Using PageScope Web Connection

PageScope Web Connection is used in the same way as other internet web
pages. Click links in the page to jump to that page, and use the [Back] and
[Next] buttons to navigate through pages that have already been loaded.
SU-502
Windows 98, Windows 98 SE, Windows ME,
Windows NT 4.0, Windows 2000,
Windows XP, or Windows Server 2003
Microsoft Internet Explorer 4.0 or later
Netscape Navigator 4 or later
2
2-17