Loading Paper In Tray 6 (Hcf) - Xerox 2101 User Manual

2.2.3

Loading Paper in Tray 6 (HCF)

The factory setting of the paper size is 8.5×11" or A4 portrait depending on your market area. You can
change the paper size to B5 portrait, A4 portrait, or 8.5×11" portrait.
● Tray 6 is optional.
● For details on the type of paper that can be loaded in tray 6 (HCF), refer to "2.1 Paper to Use".
● Do not load different types of paper
in the tray. This may result in paper
jam.
● Do not load paper exceeding the
maximum fill line.
● Before changing the factory setting
of the paper size to B5 portrait,
contact your Customer Support
Center.
2.2 Loading Paper/Changing Paper Size of Paper Trays
Procedure
1
Pull tray 6 (HCF) out right
to the end.
The bottom plate is lowered
automatically.
2
Load the paper, aligning to
the right side of the tray
and with the side to be
copied facing up.
When changing the paper size:
(1)Remove any paper in
the tray.
(2)Loosen the screw to
remove the
guide.
paper
33