Xerox 2101 User Manual page 216

5.32 Copying Documents of Different Settings (Build Job)
● If the sample set is not satisfactory
and you want to stop copying the
remaining sets, select Cancel Job.
● When the Punch or Staple option is
selected, selecting the Copy button
above the folder tabs cancels the
Punch or Staple setting and starts
copying of the remainder of the
documents.
● To cancel the copying in progress,
select Stop on the screen and then
press the C button.
186
Only one set with the specified Build Job settings will be copied.
Once copying is done, the Sample Set screen is displayed.
(2)Check the results of the sample copies.
(3) If necessary, enter the number of copies desired using the
keypad.
The number of copies can be changed after sample copy output is completed.
(4)Select Start.
The specified settings of the Build Job mode are saved to the server once all
the copies are output.
When starting copying without making a sample copy:
(1)Select End Job (Start).
When On is specified at Save to File, the Folder List (Copy File) screen
appears.