Xerox 2101 User Manual page 85

● The number of copies can be
changed on the screen that appears
when a stack of documents has
been scanned or when you select
Stop. This does not apply when
copies are to be ejected together
after all pages are scanned. If
Doc.>50 is On for the document
placed on the document glass, you
can continuously copy the
subsequent documents with the
previous settings. Refer to
"5.9 Loading Documents in Batches"
for High Document Volume settings.
● The Stop button for stopping any ongoing copying
Press the Stop button on the control panel to terminate a copy job that is in progress. Once you
have pressed the Stop button, the copy job will be suspended and the following message will be
displayed: "Press Start to continue or C button to cancel."
To resume the copy job, press the Start button again. To stop the job, press the C button.
● The Clear All button to cancel feature settings
To clear all the settings of the selected features, press the Clear All button on the control panel.
Once you have pressed the Clear All button, all settings will return to their default settings when the
power of the machine is on. The Clear All button cannot be used when copying is in progress.
The settings can automatically return to their default settings by setting a timer. Refer to "8.2
Overview of Tools Mode".
● The C (Clear) button for correcting the number of sets for copying
Press the C button on the control panel to clear any error when entering the number of sets to be
copied. Once you have pressed the C button, the number of sets will return to "1". No other settings
will be changed.
● The Stop button for changing the number of copies for any ongoing copying
You can change the number of copies on the screen to be displayed when pressing the Stop button
on the control panel (or Stop on the screen), except Collated is activated.
If you select Next Original while scanning documents loaded in the DADF, you
can continuously copy the documents.
● ●
4.1 Basic Copying Procedures
55