Xerox 2101 User Manual page 137

● When Z Fold is selected with
stapling/punching, the number of
copies will be different from
standard stapling/punching
performance due to the location of
the stapling and punching.
● When the positions for punching and
stapling are in conflict (e.g. stapling
on the top left and punching on the
right), the machine will not start even
if you press the Start button. Check
the positions again.
3
Select On for Z Fold.
When selecting Z Fold with stapling/punching:
The copies are stapled as shown below depending on the position(s) specified
for stapling or punching holes.
When Top Left is selected
Stapling
left side
(1)Select Collated/Stapled/Punched and specify the position
to be stapled or punched.
(2)Check Original Orientation.
4
Select Save to specify settings for other features if necessary.
5
Press Start.
Copies will be made and output to the finisher tray.
●
5.7 Z-Folding
When Top Right is selected
Stapling
right side
107