Xerox 2101 User Manual page 199

● A stamp is printed at a position
adjacent to the square 20 mm inside
from the top, bottom, right and left
edges of paper. A customer
engineer is permitted to adjust the
printing position. Consult your
Customer Support Center.
● A customer engineer is permitted to
change the stamp printing density.
Consult your Customer Support
Center.
● A date is printed at a position
adjacent to the square 10 mm inside
from the top, bottom, right and left
edges of paper. A customer
engineer is permitted to adjust the
printing position. The setting is
common to page number printing.
Consult your Customer Support
Center.
When printing Stamp:
Specify Options, Print On, Position, and Font/Size.
When printing Date:
Specify Display Format, Print On, Position, and Font/Size.
5.28 Copying with Stamp or Date
169