Xerox 2101 User Manual page 83

"5.2 Enlarging/Reducing Image"
"5.3 Selecting Paper Tray"
● When Auto% is selected for
Reduce/Enlarge or Auto for Paper
Supply, the document image will be
rotated to fit the orientation of the
paper loaded for copying. However,
this is only applicable when a
standard-sized document is being
copied to a standard-sized paper of
A4 or smaller. For non-standard
paper sizes, the image cannot be
automatically rotated.
"5.19 Specifying Document Type"
● You can choose from seven levels of
copy density to adjust the density of
your output. The factory setting is
Normal. For details, refer to "5.18
Adjusting Copy Density".
2
Check that Copy mode is selected.
3
Select a percentage from Reduce/Enlarge, and Select a
paper tray from Paper Supply.
If you select Auto, a paper size matching the size of the document will be
automatically selected.
4
Select your document type from Original Type on the Image
Quality screen.
4.1 Basic Copying Procedures
53