Xerox 2101 User Manual page 172

5.22 Multiple-Documents Copying on One Copy
● This feature cannot be combined with the following features: Bound Originals, Binding Erase, Mixed Size Originals, Repeat
Image, Auto Contrast of Image Quality Presets, or Copy to Edge of Reduce/Enlarge.
● When specifying your own % for the Reduce/Enlarge feature, you can only set within the range of 25-100%.
● An image loss might occur due to the size of the document image.
● When the actual number of sheets of documents is more than the one specified, the images will be copied in the same % on
multiple pages. For example, if you have 9 sheets of documents and select 8 UP, 8 images (sheets) are reduced and copied on
the first sheet of paper, but 9th original is copied by the same reduced percentage on the second sheet of paper.
● The factory setting for Multiple Up is Off.
● The factory setting can be changed in the Tools Mode. For details, refer to "8.3 Setting Tools Mode".
"3.2 Loading Documents"
● Do not select Auto for Paper
Supply when you want to use the
Multiple Up feature.
● When Multiple Up is selected,
Auto% will be automatically
selected for Reduce/Enlarge. And
when Multiple Up is selected
together with Auto% for Reduce/
Enlarge, the machine will
automatically set a ratio to enlarge/
reduce the image to fit the selected
paper size. If Auto is selected for
Paper Supply, an appropriate paper
tray will be automatically selected.
142
Procedure
1
Load the documents.
2
From Paper Supply on the Basic Features screen, select a
paper tray with the desired paper size.
3
Select Multiple Up on the Output Format screen.
The Multiple Up screen is displayed.