Copying On Transparency - Xerox 2101 User Manual

To copy on transparencies, load them in tray 5 (bypass) and then select the correct paper type for copying.
● Do not load the transparencies into trays 1, 2, 3, and 4 and the optional trays 6 (HCF) and 7 as it may cause machine
breakdown or paper jam.
● Use only the recommended transparencies. If not, it may cause machine breakdown or paper jam.
If you select Transp Separators on the Output Format screen, one sheet of blank paper will be inserted
automatically after every transparency copied.
To copy on transparency, you must load paper in the same orientation and of the same paper size as the
document in trays 1, 2, 3, 4 or the optional trays 6 (HCF) and 7 beforehand.
● The separators, output as blank paper, will not be used for copying and will not be counted by the meters. However, they will be
counted if Printed Separators is selected on the Transparency Separators screen.
"5.23 Inserting Transparency Separators"
"3.2 Loading Documents"
● Use transparencies meant for
printing in black and white.
● Load OHP (V515) in portrait
direction to prevent paper jam.

Copying on Transparency

Procedure
1
Load the documents.
2
Load
tray 5 (bypass).
Adjust the guide gently to align
the transparencies.
The Tray 5 (bypass) screen is
displayed.
3
Select A/B Series Size and A4 P for Paper Size and
Transparency for Paper Type.
transparencies in
69