Adjusting Copy Density - Xerox 2101 User Manual

This feature allows you to adjust the copy density.
Options available for this feature are:
Auto
The copy density will be automatically adjusted.
However, if Photo or Map has been selected for Original Type, the copy density will be adjusted to the
level of Normal.
Lightest-Darkest
You can select from seven levels of copy density from Lightest to Darkest.
● Auto cannot be selected together with any of the Lightest-Darkest levels.
● The factory setting is Normal.
● If any image quality preset has been selected, the copy density will be automatically set. Any copy density level set before selecting
an image quality preset will be changed accordingly.
"3.2 Loading Documents"
● You can adjust the copy density
except Auto on the Basic Features
screen.
● Auto cannot be selected together
with any of the Lightest-Darkest
levels.

Adjusting Copy Density

Document
Procedure
1
Load the documents.
2
Select a copy density level from Lighter/Darker on the Image
Quality screen.
3
Using the keypad, enter the number of copies desired and
then press Start on the control panel.
Copies will be made.
●
Lightest
Darkest
Lighter/Darker
133