A.b.s. Function "A.b.s - FUTABA 4PL-2.4GHZ Instruction Manual

A.B.S. Function "A.B.S"

When the brakes are applied while cornering with a 4 Wheel Drive or other type of ve-
hicle, understeer may occur. The generation of understeer can be eliminated and corners
can be smoothly cleared by using this function.
Operation
- When the brakes are applied, the throttle servo will pulse intermittently. This will
have the same effect as pumping the brakes in a full size car.
- The brake return amount, delay amount, pulse cycle, and brake duty can be adjusted.
Operation display
During ABS operation, the LED blinks.
Display the A.B.S function screen as described on P64.
- AB.P : Amount of brake return
Sets the rate at which the ser-
vo returns versus trigger oper-
ation for brake release. When
set to 0%, the ABS function
is not performed. When set to
50%, the servo returns 50%
(1/2) of the trigger opera-
tion amount and when set to
100%, the servo returns to the
neutral position.
68
Setup item selection
- Select by by (UP) or (DN) button.
Setup items
MODE
AB.P
DELY
CYCL
TG.P
DUTY
A.B.S function
: Function ON/Off
: Brake return amount
: Delay amount
: Cycle speed
: Trigger point
: Cycle duty ratio
DUTY (duty): X and Y ratio
X: (Brake application time)
TG.P (Trigger point)
Trigger operation
A.B.S Function "A.B.S"
(Throttle system)
Without A.B.S.
With A.B.S.
A.B.S
Y: (Brake return time)
AB.P
(Amount of
CYCL (Cycle)
brake return)