FUTABA 4PL-2.4GHZ Instruction Manual page 33

When the (CT) button is pressed at all the screens, an item preceded by an * is displayed to
its setup screen. For example, when *STEERING is selected at the MENU screen and the
(CT) button is pressed, that item is displayed to the steering related setup screen and REV
(servo reverse), SUBTR (sub trim), EPA (end point adjuster), and other functions can be set.
STEERING selected by press-
ing the (UP) or (DN) button on
the menu screen.
Value of each function and changing the set value
Values, settings, and other data on all the function setting screens are changed with the (+)
and (-) buttons.
Returning to the menu screen and HOME screen
Return from a setting screen to the menu screen and HOME screen as follows:
Setting screen
When cursor indicates a data setting item.
Data setting items with
* are moved to another
item by pressing the
(UP) or (DN) button.
UP
DN
CT
(STEERING 1 screen)
Example: The servo
d ir e c t i o n i s s et by
selecting REV (servo
reverse) by pressing
the (UP) or (DN) but-
ton on the steering
screen and selecting
"NOR" or REV" by
pressing the (+) or (-)
button.
When an item with * is
selected.
THROTTLE selected by press-
ing the (UP) or (DN) button on
the STEERING 1 screen.
MENU screen
CT
Pressed simultaneously.
CT
(THROTTLE screen)
Example: The coun-
terclockwise travel of
the steering servo is
set by pressing the
( U P ) o r ( D N ) b u t -
ton on the steering
screen and adjusting
EPA-L (end point) by
pressing the (+) or (-)
button.
HOME screen
CT
Pressed simultaneously.
33