FUTABA 4PL-2.4GHZ Instruction Manual page 61

DT2
DT4
Relationship between set value
and step amount
(Setting range: 1~10, 20, 30, 40, 50,
100, 2P)
-Steering trim/throttle trim
When set to the minimum "1", the total
trim operating width is 200 clicks. For
"100", the total operating width is 2 clicks
and for 2P, the total operating width is 1
click.
-Rate, etc. setting
This is the % value which is operated by
1 click relative to the set value of each
rate. Since the total operating width of
functions having a rate of -100~0~+100
is 200%, when set to "100", the total op-
erating width is 2 clicks. Since the total
operating width of functions with a 0~100
rate is 100%, "100" and 2P are operated
by 1 click.
-Channel 3/4
When set to the minimum "1", the to-
tal operating width of channel 3 is 200
clicks. For "100", the total operating with
is 2 clicks and 2P is operated by 1 click.
DT1
Set table functions (DL1, DT1/DT2/DT3)
Abbreviation
used on setup
screen
D/R
ATL
EXP-ST
EXP-FW
EXP-BK
SPD-TN
SPD-RN
ABS.PS
ABS.DL
CYCLE
ACC-FW
ACC-BK
TH-SPD
ST-TRM
TH-TRM
CH3
CH4
SUBTR1
SUBTR2
SUBTR3
SUBTR4
IDLE
ESC-RT
TH-OFF
PMX-A
PMX-B
BK3-RT
BK4-RT
4WS-RT
OFF
Function Select Trim Dial "TRIM DIAL"
DT3
Function name, etc
Dual rate function
ATL function
Steering EXP
Throttle EXP (Forward side)
Throttle EXP (Brake side)
Steering speed (Turn side)
Steering speed (Return side)
A.B.S. function (Return amount)
A.B.S. function (Delay)
A.B.S. function (cycle speed)
Throttle acceleration (Forward side)
Throttle acceleration (Brake side)
Throttle speed
Steering trim
Throttle trim
Channel 3
Channel 4
Sub trim (CH1)
Sub trim (CH2)
Sub trim (CH3)
Sub trim (CH4)
Idle up function
Dual ESC mixing (4ch ESC rate)
Throttle off (engine cut)
Program mixing (RGHT/BRAK/DOWN sides)
Program mixing (LEFT/FWRD/UP sides)
Brake mixing (3ch brake rate)
Brake mixing (4th brake rate)
4WS mixing (3ch steering rate)
Not used
DL1
61