FUTABA 4PL-2.4GHZ Instruction Manual page 47

Refer to P44 and display the channel menus to be set.
(STEERING 1 menu screen)
Setting item (channel and direction)
EPA-L :Steering (left side)
EPA-R :Steering (right side)
EPA-F :Throttle (foward side)
EPA-B :Throttle (brake side)
EPA-U :3rd or 4th channel (up side)
EPA-D :3rd or 4th channel (down side)
Steering (EPA) adjustment
(Preparation)
- Display the STEERING 1 menus to be set.
- Before setup of the steering end point adjustment (EPA), set
the steering D/R rever (initial setup: DT3) to the maximum
steering angle position 100%.
- Select the setting item "EPA-L" by (UP) or (DN) button.
1
Steering (left side) adjustment
Turn the steering wheel fully to the left and
use the (+) or (-) buttons to adjust the steer-
ing angle.
2
Steering (right side) adjustment
Turn the steering wheel fully to the right and
use the (+) or (-) buttons to adjust the steer-
ing angle.
3
When ending, return to the menu screen by pressing the (CT)
button.
Channel menu screens
Move the cursor to
*STEERING by (UP)
or (DN) button and
press the (CT) button.
Move the cursor to
*THROTTLE by (UP)
or (DN) button and
press the (CT) button.
(THROTTLE 1 menu screen)
End Point Adjuster "EPA"
UP
(CH3/CH4 menu screen)
Setting item selection
(Steering and Throttle direction)
- The direction (EPA-L and EPA-R) linked with
the steering wheel is switched.
- The direction (EPA-F and EPA-B) linked with
the throttle trigger is switched.
(HOME screen)
Adjust button
Adjust with the (+) and (-) but-
tons.
- Return to the initial value "100"
by pressing the (+) and (-) but-
tons simultaneously for about 1
second.
Steering EPA
EPA-L
EPA-R
Initial value :100
DN
100
:0~120
:0~120
47