Function Select Switch "Switch - FUTABA 4PL-2.4GHZ Instruction Manual

Function Select Switch "SWITCH"

Selection of the function to be performed by push switch (SW1.PSH, PS2.SLD) and
operation system setting can be performed by this function.
- The functions that can be assigned to each switch are listed on the next page.
- SW1.PSH alternate operation (operation which switches between ON and OFF
each time the switch is pressed) is possible.
NOR (Normal) -ON only while pressed, OFF when released.
ALT (Alternate) -Switched between ON and OFF each time pressed.
Display the function select switch screen by as follows:
Select MENU
(HOME screen)
Function select switch setting
1
(Setting SW selection)
Select the SW you want to set by (UP) or (DN) button.
2
(Function setting)
Select the function with the (+) or (-) button.
-Refer to the list for the abbreviations of the functions.
(Changing the SW1.PSH operation system)
Select DIR of <SW1.PSH) by (UP) or (DN)
button.
Select ALT or NOR with the (+) or (-) button.
3
When ending setting return to the DIAL SW screen by
pressing the (CT) button. To return to the menu screen, se-
lect <MENU> by (UP) or (DN) button and press the (CT) but-
ton and to return to the HOME screen select <HOME> by (UP)
or (DN) button and press the (CT) button.
62
CT
(MENU screen)
Function Select Switch "SWITCH"
CT
(DIAL SW screen)
CT
(Function Switch screen)
Function selection
Direction of operation setting
Adjust button
Adjust with the (+) and (-) but-
tons.