Digital Trim Operation; Grip Lever Operation - FUTABA 4PL-2.4GHZ Instruction Manual

Digital Trim Operation

(Initial settings: DT1: Steering trim, DT2: Throttle trim,)
Operating by the lever: Push the lever to the left or right (up or down) The current posi-
tion is displayed on the LCD screen.
DT2
any farther.
when adjustments are made.
Trim Operation
With the center trim feature, trim adjustments have no effect on the maximum
servo travel. This prevents the linkages from binding when adjustments are made.

Grip Lever Operation

(Initial setting: DT3; Steering D/R, DT4; ATL)
Operate the dials by turning them. The current set value is displayed on the LCD screen.
move any farther.
20
DT1
DT3
DT4
Steering trim display
Throttle trim display
Steering D/R
display
ATL display