FUTABA 4PL-2.4GHZ Instruction Manual page 95

(Setting liquid crystal backlighting time)
Select the setting item "LHT-TM" by (UP) or (DN)
button, and use the (+) and (-) buttons to set the
ON time.
- When "KEY" is set at the preceding item, this ON time be-
comes effective.
When ending, return to the menu screen by
pressing the (CT) button.
(Setting the battery type)
Select the setting item "BATT" by (UP) or (DN)
button, and select the mode by pressing the (+)
or (-) button.
"N5/L2" :Futaba rechargeable type battery
"DRY4" :Dry cell battery (alkaline battery recommended) 4 batteries
Voltage display
When BATT is set to dr y cell
use DRY4 or N5/L2, the volt-
age display of the HOME screen
changes.
(DRY4 )
When ending, return to the menu screen by pressing the (CT)
button.
(Adjusting the buzzer tone)
Select the setting item "BUZZER" by (UP) or
(DN) button, and use the (+) and (-) buttons to
adjust the tone.
- Decide by referring to the tone at adjustment.
When ending, return to the menu screen by
pressing the (CT) button.
(N5/L2)
System Functions "SYSTEM"
Backlighting time (LHT-TM)
1~30
Initial value: 10
Battery Type (BATT)
DRY4, N5/L2
Buzzer tone (BUZZER)
OFF, 1~100
Initial value: 85
95