Throttle Cut - FUTABA 10J Instruction Manual

Throttle cut

THR.CUT
Function
This function cuts (stops) the engine or motor
by stick operation. At throttle operation, the rate is
adjusted to the position which completely cuts the
throttle servo or ESC when the throttle is operated.
When Thr.Cut is active, the throttle position is held
regardless of the throttle stick position.
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
（1 second）
Mode
Activating the function
Cut Position rate
Throttle Position
Switch selection
Switch direction
● Select the setting item
with the Jog key.
"THR.CUT"
② Select
from the menu with the
Jog key.
● Sets the ON/OFF direction of the selected switch.
○ 2P SW：NULL, UP, DOWN
○ 3P SW：NULL, UP, UP&D, UP&C, CNTR, C&DN, DOWN
(ACROBATIC)
∼
③ Open the setting screen by
pressing the Jog key.
● When not using this Function
select INH. The display of On/
Off is shown when active and
assigned to a switch.
● Adjusts the rate to the position
t h a t c o m p l e t e l y c u t s t h e
throttle servo or ESC.
● The THR item can be set
when the operation mode
i s E S C . T h e n u m b e r i n
parentheses is the current
throttle stick position.
113