Cisco CP-7911G-CH1 System Administrator Manual page 80

How to Configure Cisco Unified SIP SRST 4.1 Features
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
voice register pool pool-tag
Example:
Router(config)# voice register pool 4
Step 4
digit collect kpml
Example:
Router(config-register-pool)# digit collect
kpml
Step 5
end
Example:
Router(config-register-pool)# end
Step 6
show voice register dial-peers
Example:
Router# show voice register dial-peers
What to Do Next
After changing the KPML configuration in Cisco Unified SRST, you do not need to create new
configuration profiles and restart the phones. Enabling or disabling KPML is effective immediately in
Cisco Unified SRST.
Cisco Unified SCCP and SIP SRST System Administrator Guide
80
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Enters global configuration mode.
Enters voice register pool configuration mode to set
phone-specific parameters for a SIP phone.
pool-tag: Unique sequence number of the SIP phone to
•
be configured. Range is version and
platform-dependent; type ? to display range. You can
modify the upper limit for this argument with the
max-pool command.
Enables KPML digit collection for the SIP phone.
This command is enabled by default for supported
Note
phones in Cisco Unified CME and
Cisco Unified SRST.
Exits to privileged EXEC mode.
Displays details of all dynamically created VoIP dial peers
associated with the Cisco Unified CME SIP register
including the defined digit collection method.
Cisco Unified SIP SRST 4.1
OL-13143-04