Appendix A: Configuring Cisco Unified Sip Srst Features Using Redirect Mode; Contents; Prerequisites For Cisco Unified Sip Srst Features Using Redirect Mode; Restrictions For Cisco Unified Sip Srst Features Using Redirect Mode - Cisco CP-7911G-CH1 System Administrator Manual

Appendix A: Configuring Cisco Unified SIP SRST
Features Using Redirect Mode
Revised: February 3, 2011
This chapter applies to version 3.0 only.
Note
This chapter describes Cisco Unified Session Initiation Protocol (SIP) Survivable Remote Site
Telephony (SRST) features using redirect mode.

Contents

•
•
•
•
•
•
Prerequisites for Cisco Unified SIP SRST Features Using
Redirect Mode
Complete the prerequisites documented in the
section on page 19
Restrictions for Cisco Unified SIP SRST Features Using Redirect
Mode
See the restrictions documented in the
on page 19
OL-13143-04
Prerequisites for Cisco Unified SIP SRST Features Using Redirect Mode, page 273
Restrictions for Cisco Unified SIP SRST Features Using Redirect Mode, page 273
Information About Cisco Unified SIP SRST Features Using Redirect Mode, page 274
How to Configure Cisco Unified SIP SRST Features Using Redirect Mode, page 274
Configuration Examples for Cisco Unified SIP SRST Features Using Redirect Mode, page 278
Where to Go Next, page 280
in the "Cisco Unified SCCP and SIP SRST Feature Overview" section on page
section in the "Cisco Unified SCCP and SIP SRST Feature Overview" section on page
"Prerequisites for Configuring Cisco Unified SIP SRST"
"Restrictions for Configuring Cisco Unified SIP SRST" section
Cisco Unified SCCP and SIP SRST System Administrator Guide
11.
11.
273