Cisco CP-7911G-CH1 System Administrator Manual page 137

Configuring Call Handling
Command or Action
Step 5
end
Example:
Router(config)# end
Examples
The following example shows the transfer-digit-collect method set to the legacy value of orig-call:
!
call-manager-fallback
transfer-digit collect orig-call
!
Configuring Global Prefixes
The dialplan-pattern command creates a dial-plan pattern that specifies a global prefix for the
expansion of abbreviated extension numbers into fully qualified E.164 numbers.
The extension-pattern keyword allows additional manipulation of abbreviated extension-number prefix
digits. When this keyword and its argument are used, the leading digits of an extension pattern are
stripped and replaced by the corresponding leading digits of the dial-plan pattern. This command can be
used to avoid Direct Inward Dialing (DID) numbers like 408 555-0101 resulting in 4-digit extensions
such as 0101.
Global prefixes are set with the dialplan-pattern command. Up to five dial-plan patterns can be created.
The no-reg keyword provides dialing flexibility and prevents the E.164 numbers in the dial peer from
registering to the gatekeeper. You have the option not to register numbers to the gatekeeper so that those
numbers can be used for other telephony services.
SUMMARY STEPS
1.
2.
3.
OL-13143-04
call-manager-fallback
dialplan-pattern tag pattern extension-length length [extension-pattern extension-pattern]
[no-reg]
exit
How to Configure Cisco Unified SCCP SRST
Purpose
Returns to privileged EXEC mode.
Cisco Unified SCCP and SIP SRST System Administrator Guide
137