Cisco CP-7911G-CH1 System Administrator Manual page 241

Integrating Voice Mail with Cisco Unified SRST
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
9.
DETAILED STEPS
Command or Action
Step 1
call-manager-fallback
Example:
Router(config)# call-manager-fallback
Step 2
voicemail phone-number
Example:
Router(config-cm-fallback)# voicemail 5550100
Step 3
call-forward busy directory-number
Example:
Router(config-cm-fallback)# call-forward busy
2000
Step 4
call-forward noan directory-number timeout
seconds
Example:
Router(config-cm-fallback)# call-forward noan
2000 timeout 10
OL-13143-04
call-manager-fallback
voicemail phone-number
call-forward busy directory-number
call-forward noan directory-number timeout seconds
exit
voice register pool tag
call-forward b2bua busy directory-number
call-forward b2bua noan directory-number timeout seconds
exit
How to Integrate Voice Mail with Cisco Unified SCCP and SIP SRST
Purpose
Enters call-manager-fallback configuration mode.
Configures the telephone number that is dialed when the
message button on a Cisco Unified SCCP IP Phone is
pressed.
phone-number: Phone number configured as a
•
speed-dial number for retrieving messages.
Configures call forwarding to another number when the
Cisco SCCP IP phone is busy.
directory-number: Selected directory number
•
representing a fully qualified E.164 number. This
number can contain "." wildcard characters that
correspond to the right-justified digits in the directory
number extension.
Configures call forwarding to another number when no
answer is received from the Cisco SCCP IP phone.
• directory-number: Selected directory number
representing a fully qualified E.164 number. This
number can contain "." wildcard characters that
correspond to the right-justified digits in the directory
number extension.
timeout seconds: Sets the waiting time, in seconds,
•
before the call is forwarded to another phone. The
seconds range is from 3 to 60000.
Cisco Unified SCCP and SIP SRST System Administrator Guide
241