Cisco CP-7911G-CH1 System Administrator Manual page 275

Appendix A: Configuring Cisco Unified SIP SRST Features Using Redirect Mode
Configuring Call Redirect Enhancements to Support Calls Globally
To enable global IP-to-IP call redirection for all VoIP dial peers, use voice service configuration mode.
When IP-to-IP redirection is configured in dial-peer configuration mode, the configuration for the
Note
specific dial peer takes precedence over the global configuration entered under voice service
configuration mode.
SUMMARY STEPS
1.
2.
3.
4.
5.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
voice service voip
Example:
Router(config)# voice service voip
Step 4
redirect ip2ip
Example:
Router(config-voi-srv)# redirect ip2ip
Step 5
end
Example:
Router(config-voi-srv)# end
OL-13143-04
enable
configure terminal
voice service voip
redirect ip2ip
end
How to Configure Cisco Unified SIP SRST Features Using Redirect Mode
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Enters voice service configuration mode.
Redirects SIP phone calls to SIP phone calls globally on a
gateway using the Cisco IOS voice gateway.
Returns to privileged EXEC mode.
Cisco Unified SCCP and SIP SRST System Administrator Guide
275