Cisco CP-7911G-CH1 System Administrator Manual page 175

Configuring Call Handling
DETAILED STEPS
Command or Action
Step 1
call-manager-fallback
Example:
Router(config)# call-manager-fallback
Step 2
max-conferences max-conference-numbers
Example:
Router(config-cm-fallback)# max-conferences 16
Step 3
exit
Example:
Router(config-cm-fallback)# exit
Examples
The following example configures up to eight simultaneous three-way conferences on a router:
call-manager-fallback
max-conferences 8
OL-13143-04
Purpose
Enters call-manager-fallback configuration mode.
Sets the maximum number of simultaneous three-party
conferences supported by the router. The maximum number
possible is platform dependent:
Cisco 1751 router:8
•
Cisco 1760 router:8
•
Cisco 2600 series routers:8
•
Cisco 2600-XM series routers:8
•
Cisco 2801 router:8
•
Cisco 2811, Cisco 2821, and Cisco 2851 routers:16
•
• Cisco 3640 and Cisco 3640A routers:8
• Cisco 3660 router: 16
• Cisco 3725 router: 16
Cisco 3745 router: 16
•
Cisco 3800 series router: 24
•
Exits call-manager-fallback configuration mode.
Cisco Unified SCCP and SIP SRST System Administrator Guide
How to Configure Optional Features
175