Configuring Central Location Voice-Mail System (Fxo And Fxs): Example - Cisco CP-7911G-CH1 System Administrator Manual

Configuration Examples for SCCP SRST
! Dial-Peer Configuration for Integration of Voice-Mail with Cisco Unified SRST
!
dial-peer voice 101 pots
destination-pattern 14011
port 3/0/0
!
dial-peer voice 102 pots
preference 1
destination-pattern 14011
port 3/0/1
!
dial-peer voice 103 pots
preference 2
destination-pattern 14011
port 3/1/0
!
dial-peer voice 104 pots
destination-pattern 14011
port 3/1/1
!
! Cisco Unified SRST configuration
!
call-manager-fallback
max-ephones 24
max-dn 144
ip source-address 1.4.214.104 port 2000
voicemail 14011
call-forward busy 14011
call-forward noan 14011 timeout 3
! Cisco Unified SRST Voice-Mail Integration Pattern Configuration
!
vm-integration
pattern direct 2 CGN *
pattern ext-to-ext no-answer 5 FDN * CGN *
pattern ext-to-ext busy 7 FDN * CGN *
pattern trunk-to-ext no-answer 4 FDN * CGN *
pattern trunk-to-ext busy 6 FDN * CGN *

Configuring Central Location Voice-Mail System (FXO and FXS): Example

The "Dial-Peer Configuration for Integration of Voice-Mail with Cisco Unified SCCP SRST in Central
Location" section of the example shows a legacy dial-peer configuration for a central voice-mail system.
The "Cisco Unified SCCP SRST Voice-Mail Integration Pattern Configuration" section must be
compatible with your voice-mail system configuration.
Message waiting indicator (MWI) integration is not supported for PSTN access to voice-mail systems at
Note
central locations.
! Dial-Peer Configuration for Integration of Voice-Mail with Cisco Unified SRST in Central
! Location
!
dial-peer voice 101 pots
destination-pattern 14011
port 3/0/0
!
! Cisco Unified SRST configuration
!
call-manager-fallback
Cisco Unified SCCP and SIP SRST System Administrator Guide
250
Integrating Voice Mail with Cisco Unified SRST
OL-13143-04