Channel Parameter Pop-Ups. The Att/Hpf/Eq Pop-Up In Detail - Yamaha M7CL-48 Quick Start Manual

Channel parameter pop-ups. The ATT/HPF/EQ pop-up in detail.

The EQ encoders on the selected channel panel will always operate the EQ of the selected channel. However
the ATT/HPF/EQ pop-up gives visual feedback about the changes being made and is also required to make some
other changes like shelf/bell or LPF.
Pressing [COPY] stores the displayed EQ
curve into a temporary "copy buffer". If
another EQ is selected to the screen, then
pressing [PASTE] will change that EQ to
match the copied source. Use care because
you cannot undo a paste!
[FLAT] will zero the EQ gains.
[DEFAULT] will zero gains and re-
turn frequencies and Q controls to
their default values.
Change the high and low EQ bands
to be bell shape or shelving using
these buttons. The high band can
also be LPF.
[TYPE I] and [TYPE II] EQ are dif-
ferent ways of calculating the
complex mathematics of the EQ
section. Each type has a slightly
different audio character.
T ; We suggest trying [TYPE II] for
a more analog feel, but use [TYPE
I] when using large EQ cuts.
The [ATT] knob is a digital attenua-
tor. Use this to boost or reduce dig-
ital input signals or to compensate
for EQ boosts or cuts changing the
level through the channel.
MTAC STUDIO M7CL Quick Start Guide - FOR TRAINING PURPOSES
Tip; If you copy an EQ curve to the
"copy buffer", you can change the
curve and then press [COMPARE] to
alternate between the two curves.
11
Use the [8ch] and [ALL] tabs to see
multiple EQ views.
This is especially useful when copy
and pasting or using the ATT.
[ON] will bypass the
EQ but keep the EQ
curve displayed in
grey.