Show Log; Table 4-20 Show Logging Trap - Display Description - SMC Networks 8748L2 Management Manual

Field
Syslog logging
REMOTELOG
status
REMOTELOG
facility type
REMOTELOG
level type
REMOTELOG
server IP address
Related Commands
show logging sendmail (4-68)

show log

This command displays the log messages stored in local memory.
Syntax
show log {flash | ram}
• flash - Event history stored in flash memory (i.e., permanent
memory).
• ram - Event history stored in temporary RAM (i.e., memory
flushed on power reset).
Default Setting
None
Command Mode
Privileged Exec

Table 4-20 show logging trap - display description

Description
Shows if system logging has been enabled via the logging
on command.
Shows if remote logging has been enabled via the logging
trap command.
The facility type for remote logging of syslog messages as
specified in the logging facility command.
The severity threshold for syslog messages sent to a remote
server as specified in the logging trap command.
The address of syslog servers as specified in the logging
host command.
S M
YSTEM ANAGEMENT
C
OMMANDS
4-63