Ip Http Secure-Port; Table 4-13 Https System Support - SMC Networks 8748L2 Management Manual

• When you start HTTPS, the connection is established in this way:
- The client authenticates the server using the server's digital
certificate.
- The client and server negotiate a set of security protocols to use for
the connection.
- The client and server generate session keys for encrypting and
decrypting data.
• The client and server establish a secure encrypted connection.
A padlock icon should appear in the status bar for Internet Explorer
5.x and Netscape Navigator 4.x or later versions.
• The following web browsers and operating systems currently support
HTTPS:
Web Browser
Internet Explorer 5.0 or later
Netscape Navigator 4.76 or later Windows 98,Windows NT (with service
• To specify a secure-site certificate, see "Replacing the Default
Secure-site Certificate" on page 3-49. Also refer to the copy command
on page 4-83.
Example
Console(config)#ip http secure-server
Console(config)#
Related Commands

ip http secure-port (4-41)

copy tftp https-certificate (4-83)
ip http secure-port
This command specifies the UDP port number used for HTTPS/SSL
connection to the switch's web interface. Use the no form to restore the
default port.
S

Table 4-13 HTTPS System Support

Operating System
Windows 98,Windows NT (with service
pack 6a), Windows 2000, Windows XP
pack 6a), Windows 2000, Windows XP,
Solaris 2.6
M
YSTEM ANAGEMENT
C
OMMANDS
4-41